 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PHOTOCOUPLER KB3541NT Features 1.AC inputs 2.High current transfer ratio 3.Opaque type, mini-flat package 4.Subminiature type (The volume is smaller than that of our conventional DIP type by as far as 30%) 5.Isolation voltage between input and output Viso:3750Vrms 6.Employs double transfer mold technology 7.Recognized by UL and CUL, file NO.E225308. 8.Package:1000Pcs/Reel. 9.RoHS Compliant. Applications 1.Hybrid substrates that require high density mounting 2.Programmable controllers *PACKAGE DIMENSIONS (UNIT:mm) SMD Type UNIT : MM[INCH] TOLERANCE : 0.5[0.02] UNLESS OTHERWISE NOTED. SPEC NO: DSAD2838 APPROVED: J. Lu REV NO: V.6 CHECKED: Tracy Deng DATE: APR/06/2005 DRAWN: Y.W.WANG PAGE: 1 OF 7 ERP:1205000036 PHOTOCOUPLER KB3541NT *Absolute Maximum Ratings (Ta=25C) Parameter Forward current Input Power dissipation Collector-emitter voltage Emitter-collector voltage Output Collector current Collector power dissipation Total power dissipation *1 Symbol IF P VCEO VECO IC PC Ptot Viso Topr Tstg Tsol Rating 50 70 35 6 80 150 170 3750 -30 to +100 -40 to +125 260 Unit mA mW V V mA mW mW Vrms C C C Isolation voltage Operating temperature Storage temperature *2 Soldering temperature *1 40 to 60RH, AC for1 minute. *2 For 10 seconds. *Electro-optical Characteristics Parameter Forward voltage Input Peak forward voltage Collector dark current Output Collector-emitter breakdown voltage Emitter-collector breakdown voltage Current transfer ration Collector-emitter saturation voltage Transfer characteristics Rise time Response time Fall time tr Symbol VF VFM ICEO BVCEO BVECO CTR VCE (sat) tr Vce=2V IC=2mA RL=100 Conditions IF= 20mA IFM=0.5A Vce=20V IC=0.1mA IE=10uA IF=0 IF=0 IF=0 Min. 35 6 450 Typ. 1.2 1600 0.8 60 53 7400 1.0 300 250 Max. 1.4 3.0 10 -6 Unit V V A V V V uS uS IF= 1mA Vce=5V IF= 20mA IC=1mA SPEC NO: DSAD2838 APPROVED: J. Lu REV NO: V.6 CHECKED: Tracy Deng DATE: APR/06/2005 DRAWN: Y.W.WANG PAGE: 2 OF 7 ERP:1205000036 PHOTOCOUPLER KB3541NT Fig. 1 Current Transfer Ratio vs. Forward Current Fig. 2 Forward Current vs. Forward voltage Fig. 3 Collector Current vs. Collector-emitter Voltage Fig. 4 Relative Current Transfer Ratio vs. Ambient Temperature Fig. 5 Collector-emitter Saturation Voltage vs. Ambient Temperature Fig. 6 Response Time vs. Load Resistance SPEC NO: DSAD2838 APPROVED: J. Lu REV NO: V.6 CHECKED: Tracy Deng DATE: APR/06/2005 DRAWN: Y.W.WANG PAGE: 3 OF 7 ERP:1205000036 PHOTOCOUPLER KB3541NT Fig. 7 Collector-emitter Saturation Voltage vs. Forward Current Fig. 8 Collector Dark Current vs. Ambient Temperature SPEC NO: DSAD2838 APPROVED: J. Lu REV NO: V.6 CHECKED: Tracy Deng DATE: APR/06/2005 DRAWN: Y.W.WANG PAGE: 4 OF 7 ERP:1205000036 PHOTOCOUPLER KB3541NT * NOTES ON HANDLING 1.Recommended soldering conditions (Dip soldering) (1) Dip soldering Temperature Time Cycle Flux 260 or below (molten solder temperature) Less than 10 seconds. One cycle allowed to be dipped in solder including plastic nold portion. Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (2) Cautions Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2.Cautions regarding noise Be aware that power is suddenly into the component any surge current may cause damage happen, even if the voltage is within the absolute maximum ratings. SPEC NO: DSAD2838 APPROVED: J. Lu REV NO: V.6 CHECKED: Tracy Deng DATE: APR/06/2005 DRAWN: Y.W.WANG PAGE: 5 OF 7 ERP:1205000036 PHOTOCOUPLER KB3541NT NOTES ON HANDLING 1.Recommended soldering conditions (1).Infrared reflow soldering Peak reflow temperature Time of temperature higher than 210 C Number or reflows Flux 235 C or below(package surface temperature) 30 seconds or less Three Rosin flux containing small amount of chlorine(The flux with a maximum chlorine content of 0.2Wt % is recommended.) Recommended Temperature Profile of infrared Reflow (heating) to 10 s 235 C (peak temperature) to 30 s 100 to 160 C 60 to 120s (preheating) 210 C Package surface Temperature T( C) CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. RESTRICTIONS ON PRODUCT USE The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices / types available in every country. We are mention about our product quality stablity, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing KINGBRIGHT products, to observe standards of safety, and to a avoid situations in which a malfunction or failure of a KINGBRIGHT product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that KINGBRIGHT products are used within specified operating ranges as set forth in the most recent products specifications. SPEC NO: DSAD2838 APPROVED: J. Lu REV NO: V.6 CHECKED: Tracy Deng DATE: APR/06/2005 DRAWN: Y.W.WANG PAGE: 6 OF 7 ERP:1205000036 PHOTOCOUPLER KB3541NT Outline and Dimension( Tape) ( ) (Units : mm) Tape Direction Outline and Dimension( Reel) ( ) Packing:1000pcs/reel SPEC NO: DSAD2838 APPROVED: J. Lu REV NO: V.6 CHECKED: Tracy Deng DATE: APR/06/2005 DRAWN: Y.W.WANG PAGE: 7 OF 7 ERP:1205000036 |
Price & Availability of KB3541NT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |